Draft tubes are essential components in most types of turbines, such as Kaplan, Francis, and reaction turbines. The component is like a pipe designed with areas increasing gradually that connect the outlet of the runner to a tailrace.
With its two ends, one is connected to the runner outlet, and the other end is submerged below the level of water in the tailrace. In this component, kinetic energy is converted into static pressure.
Well, in this reading, we’ll explore what a draft tube is, its applications, parts, diagram, types, and how it works. We’ll also explore its advantages and disadvantages.
Let’s begin!
Learn about Turbine with this detailed guide!
What is a Draft Tube?
A draft tube is a connecting pipe fitted generally at the outlet or exit of a turbine to convert the kinetic energy of water at the outlet into static pressure. with this component, wastage of the kinetic energy of water is avoided.
In a draft tube, the diameter is smaller near the inlet and large near its outlet. This outlet is always submerged in water. Cast steel and cement concrete are the materials used in making a draft tube. z\Just as earlier mentioned, draft tubes are generally used in power turbines like reaction, Kaplan, and Francis turbines. The system is located just under the runner and allows deceleration of the flow velocity exit from the runner.
Draft tubes are used in turbines to avoid the problem of backflow, which is why it located between the turbine exit and tailrace. Turbines like Pelton or impulse do not need a draft tube because the head available to the turbine is very large.
This results in an above-atmospheric pressure at the turbine exit. Because of the above atmospheric pressure of water at the turbine exit, backflow of water will never occur.
Applications of Draft Tubes
Applications of draft tubes in turbines have already been mentioned above. They are used to increase the pressure from low turbine exit pressure to the pressure of the surrounding to which the fluid is rejected.
The primary function of a draft tube is to convert water kinetic energy into pressure energy, decrease the velocity of water, and raise the pressure of the water before joining the tailrace. This pipe is used to steadily increase the cross-sectional area.
You should also learn about Reaction Turbine with this detailed guide!
Diagram
Types of Draft Tubes
Below are the various types of draft tubes:
Conical Draft Tube
Conical types of draft tubes allow their flow direction to be straight and divergent. They are usually made with mild steel plates, having a tapered shape design and a greater outer diameter than the inlet.
The tapered angle of the draft tube is not too wide to induce a divergence of the flow from the wall of the draft tube. Also, the angle should not be too short, because a longer draft tube is required to offer a substantial loss of kinetic energy.
Simple Elbow Draft Tube
These types of draft tubes carry the shape of an elbow. It is often used in a Kaplan turbine. The cross-section area remains the same for the entire length of the draft tube, while its inlet and outlet are circular.
Elbow draft tubes are used at low head positions and the turbine is mounted next to the tailrace. This helps to minimize the expense of drilling and the exit diameter is as wide as a position to recover kinetic energy at the runner outlet.
You should learn about a Kaplan Turbine with this detailed guide!
Moody Draft Tube
In moody draft tube types, the outlet is split into two sections and has one inlet. This tube is similar to a conical draft tube. Moody draft tube types help to reduce the swirling motion of water.
Elbow Draft Tube with Varying Cross-Section
These draft tube types with varying cross-sections are improvements on a simple elbow draft. Its inlet is circular, while the outlet is rectangular. Generally, the horizontal section of the draft tube is inclined up to prevent air from reaching the exit area.
The draft tube varies in cross-section from inlet to outlet. This outlet is beneath the tailrace.
How Does a Draft Tube Work?
The working of draft tubes in a turbine is less complex and can be easily understood. In the case of the Kaplan and Francis turbines, the head available at the inlet is low, making the turbine to be placed much closer to the tailrace.
This helps to get a maximum head. Most of the pressure of water is converted into mechanical energy of the turbine. The pressure head at the outlet of the turbine is below the atmospheric pressure.
Backflow can occur since the exit of a turbine is located near the tailrace and the pressure of water at the exit of a turbine is less than the atmospheric pressure.
This occurs because the water flows from high pressure to low pressure and the pressure at the exit of the turbine is less than atmospheric and at the tailrace, there is atmospheric pressure.
This backflow can cause serious damage to the turbine and its parts, causing total breakdown. To avoid this backflow problem, a draft tube is used between the outlet of the turbine and the tailrace. A draft tube will increase the pressure of water to atmospheric pressure.
Learn about Submersible Pump with this detailed guide!
Applying Bernoulli’s Principle at section 1-1 and 2-2
[Pressure Head + Velocity Head + Elevation Head]1-1 = [Pressure Head + Velocity Head + Elevation Head]2-2
Let
P1 = pressure of the fluid at section 1-1 (an inlet of a draft tube)
V1 = velocity of the fluid at section 1-1 (an inlet of a draft tube)
Similarly,
P2 = pressure of fluid at section 2-2 (outlet of draft tube)
V2 = velocity of fluid at section 2-2 (outlet of draft tube)
ρ = density of flowing fluid
g = gravitational force
hf = loss of head (energy) in draft tube
Hs = vertical height of draft tube above the tailrace
y = distance of the bottom of draft tube from tailrace.
Pa = atmospheric pressure of a fluid.
( P1 / ρg ) + ( V12 / 2g ) + ( Hs + y ) = ( P2 / ρg ) + ( V22 / 2g ) + ( 0 + hf )
( P1 / ρg ) = ( P2 / ρg ) – ( Hs + y ) + ( V22 / 2g ) – ( V12 / 2g ) + hf
The pressure head at section 2 – 2 is equal to atmospheric pressure head and distance y.
( P2 / ρg ) = ( Pa / ρg ) + y
( P1 / ρg ) = ( Pa / ρg ) + y – Hs – y + ( V22 / 2g ) – ( V12 / 2g ) + hf( P1 / ρg ) = ( Pa / ρg ) – Hs + ( V22 / 2g ) – ( V12 / 2g ) + hf
Converting the equation for our requirement (i.e., in the middle of R.H.S taking “-” common)
( P1 / ρg ) = ( Pa / ρg ) – Hs – [ ( V12 / 2g ) – ( V22 / 2g ) – hf ]
In the above equation [ ( V12 / 2g ) – ( V22 / 2g ) – hf ] is called kinetic head.
Here [ ( V12 / 2g ) – ( V22 / 2g ) ] is the dynamic head.
From the above equation, we can write
( P1 / ρg ) < ( Pa / ρg )
So P1 < Pa
The pressure head at the inlet of the draft tube or outlet of a turbine is less than the atmospheric pressure. So, the net head on the turbine with the draft tube increases.
You should also learn about Impulse Turbine with this detailed guide!
Advantages and Disadvantages of Draft Tubes
Advantages:
Below are the benefits of draft tubes in their various applications:
- Draft tube prevents splashing of water from the runner and leads the water straight to the tailrace.
- The amount of kinetic energy required at the tailrace is vastly decreased.
- Performance of the system is increased.
- The turbine head is raised as the height is increased between the turbine exit and the tailrace.
Disadvantages:
The only disadvantages of draft tubes are that extra weight is added to the system and the initial of the draft tube is high.
Conclusion
Draft tubes play a crucial role in improving the efficiency of reaction turbines by recovering kinetic energy from the water leaving the turbine. They help convert velocity head into pressure head, reduce water exit velocity, and ensure smooth water discharge into the tailrace.
By minimizing energy losses and enhancing output, draft tubes are an indispensable component in modern hydroelectric power plants, especially those using Francis and Kaplan turbines.
You should also learn about energy with this detailed guide!
FAQs on Draft Tubes
What is a draft tube?
A draft tube is a gradually expanding conduit attached to the outlet of a reaction turbine that helps recover kinetic energy and direct water flow into the tailrace.
Why is a draft tube used in reaction turbines?
It reduces the velocity of exiting water, converting kinetic energy into pressure energy, thereby increasing the overall efficiency of the turbine.
What are the types of draft tubes?
Common types include:
- Conical (straight divergent)
- Bell-mouthed (moody spreading)
- Elbow (bent type)
- Hydraulic-grade draft tube
In which turbines is a draft tube commonly used?
Draft tubes are primarily used in reaction turbines like Francis and Kaplan turbines, where water exits at high velocity and low pressure.
Can a draft tube be used in impulse turbines?
No, because impulse turbines discharge water into the atmosphere and do not require pressure recovery.
What material is used for making draft tubes?
They are usually made from concrete, steel, or reinforced materials to withstand pressure and flow erosion.
What is the function of the draft tube besides energy recovery?
Besides energy recovery, it also helps in preventing cavitation and maintaining a safe tailwater level.